Menu

Myriota Dev Kit

In this article:

    dev-toolkit1.png

    The Myriota Dev Kit gives you all the tools you need to add affordable, long battery life IoT connectivity to your product. This ready-made platform is powered by the Myriota Module; it gives you access to our direct-to-satellite technology in the fastest and most flexible way possible. Looking to purchase? Click here.

     

    Item Description
    Dimensions 130mm W x 90mm L x 200mm H (height with antenna)
    Enclosure IP65, UV-resistant
    Operating Temperature -30°C to 70°C / -22°F to 158°F
    RoHS Compliant Yes
    Power Supply

    2x Lithium AA Batteries (3 - 3.6V)
    Micro USB
    Radio Frequency

    DB1-2x Variant:
    VHF TX  160.975 - 161.475
    UHF RX  400.15 - 401

    DB2-2x Variant:
    UHF TX  399.9 - 400.05
    UHF RX  400.15 - 401
    Programming

    Serial port via micro USB or SWD
    On-board Myriota Module MCU

    Low power 32-bit microcontroller, ARM Cortex-M4, 48MHz
    256kB flash, 32kB RAM
    Communications Interfaces

    2× UART
    1× Low Energy UART with wakeup capability
    1× I²C Master Interface
    1x SPI Master Interface
    2x Pulse Counter
    2x 12-bit ADC
    1x SWD
    4x GPIO (2x with wakeup capability)
    Connectors MMCX connector for external UHF antenna
    2x17 pin male 100mil (2.54mm) pitch breakout header
    Buttons

    Reset
    Wakeup
    GNSS

    SAM-M8Q-0-10 GNSS module with onboard antenna
    GPS, Galileo and GLONASS
    Acquisition Time 1s (hot start) or 30s (cold start)
    Accuracy 2.5m CEP 50% (24 hours static, good sky view)
    Sensitivity -164 dBm (tracking)
    Temperature Sensor

    -30°C to 70°C / -22°F to 158°F range
    +/- 2°C / 35.6°F sensitivity
    Programmable LED Yes
    Encryption AES-CBC-256 using unique per-Module keys and full message encryption
    Data Destination Webhook or AWS Lambda
    Satellite Simulator

    USB dongle for lab testing of Myriota devices
    Tuned to 434MHz (LPD band)
    Short range (up to a few meters from device)

     

    Check out our Prototyping with Myriota guide and the Dev Kit User Guide. The user guide contains step by step instructions and links to the information you will need to get started developing with the Myriota SDK, building an application and deploying your device. The Development Board Manual and Myriota Module Datasheet provide further technical specifications.

    Looking to purchase a Myriota Dev Kit? Click here.

     

     

    Related articles